New Drivers Now Available! 


Please download the zip file from this link - https://e.pcloud.link/publink/show?code=XZNflIZy8qTcrJ5ybSVNLNwMDFtJVUm0mXk


Once downloaded extract it to a suitable location on your PC and run the Setup.exe


The drivers should now be installed for the ADAP1 USB to Parallel device.


You will also need the Robot Control Software, which can be downloaded below.



If you come across driver issues please carry out the following steps; 
  1. Extract the contents of the ZIP file  to a suitable location on your PC.
  2. Open device manager and locate the "LJ Create - USB ADAP1 Rev 1" device.
  3. Right Click the device and select Properties then the Driver tab.
  4. If the driver version is anything other than 10.54.20.126 select the option to Update Driver
  5. Select the option to "Browse my computer for drivers"
  6. Browse to the folder containing the extracted ADAP1 driver then click "Next"





Need something else?


Digital curriculum materials are not openly available for download.


If you require these please refer to your Resource Access Certificate (RAC) or raise a support ticket with your requirements plus details of your establishment and equipment.