For the Pneumatics Trainer to function correctly, a compressed air supply is required. This can either be from a work-shop compressed air supply, or the Hand Pump Compressor.


The Hand Pump Compressor is fitted with a hose and coupling. Push the "Quick Coupling" of the Hand Compressor onto the "Nipple" of the Pneumatics Trainer filter regulator.



Compressed Air Safety 


The pressure on the Pneumatics Trainer should not exceed 50 psi/3.5 bar. 


For safety purposes the components on the Pneumatics Trainer are rated for pressures up to 150 psi/10 bar.